Subaru Crosstrek Service Manual: Wiring diagram
COMMUNICATION SYSTEM > Horn System
WIRING DIAGRAM
Refer to “Horn System” in the wiring diagram. Horn System > WIRING DIAGRAM">
Inspection
COMMUNICATION SYSTEM > Horn SystemINSPECTIONSymptomsInspection stepsHorn does not sound1. Check the fuse.2. Check the horn relay.3. Check the role connector.4. Check the horn switch.5. Check the ho ...
Note
COMMUNICATION SYSTEM > Horn SystemNOTEFor operation procedures of each component of the horn system, refer to the respective section.• Horn ASSY: Horn">• Horn switch: Horn Swi ...
Other materials:
Disassembly
CONTROL SYSTEMS > Select LeverDISASSEMBLY1. GRIP ASSY1. Remove the button assembly_AT.(A)Claw2. Remove the rod COMPL.2. AT SELECT LEVER ASSEMBLY1. Remove the spacer plate.2. Remove the gasket.3. Insert a flat tip screwdriver with a thin tip under the connector and disconnect the harness connector ...
Inspection mode Procedure
TELEMATICS SYSTEM (DIAGNOSTICS) > Inspection ModePROCEDUREIt is possible to diagnose the DTC by performing the indicated inspection mode.After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1D ...
Inspection
SECURITY AND LOCKS > Rear Lock ButtonINSPECTION1. Using the Subaru Select Monitor, display «Rear gate/Trunk UNLOCK output» from «Data monitor».2. Check if the display changes when the rear lock button is operated.3. If the display is not correct as the result of inspection, refer to “Ge ...
