COMMUNICATION SYSTEM > Horn System
INSPECTION
Symptoms | Inspection steps |
Horn does not sound | 1. Check the fuse. |
2. Check the horn relay. | |
3. Check the role connector. | |
4. Check the horn switch. | |
5. Check the horn assembly. | |
6. Check the harness. |
Horn system
Wiring diagramDtc b28b6 pre-collision off switch
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28B6 PRE-COLLISION OFF SWITCHDetected when pre-collision brake OFF switch circuit is not installed, open-circuited or is stuck to ON.DTC detecting condition:• Wiring of pre-collision brake OFF switch is not ...
Installation
POWER ASSISTED SYSTEM (POWER STEERING) > Universal JointINSTALLATION1. Before installation, check the universal joint assembly - steering. Universal Joint > INSPECTION">2. Adjust the tilt position of the column assembly - steering to the neutral position and lock the tilt lever.3. Ali ...
Removal
CLUTCH SYSTEM > Operating CylinderREMOVALCAUTION:Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled.1. Disconnect the ground cable from battery.2. Remove the clip (A) from the air intake boot.3. Loosen the clamp ...