Subaru Crosstrek Owners Manual: Wiper intermittent time control
When the wiper switch is in the "
"
position, turn the dial to adjust the operating
interval of the wiper. The operating
interval can be adjusted in several steps
from the shortest interval to the longest.
Windshield wipers
Mist (for a single wipe)
Off
Intermitten
Low speed
High speed
To turn the wipers on, push the wiper
control lever down.
To turn the wipers off, return the lever to
the " " position.
For ...
Windshield washer
To wash the windshield, pull the wiper
control lever toward you. The washer fluid
sprays until you release the lever. The
wipers operate while you pull the lever.
NOTE
Windshield washer f ...
Other materials:
Dtc b2902 rear height sensor circuit
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2902 REAR HEIGHT SENSOR CIRCUITDTC detecting condition:Detected when error occurs in the rear height sensor.Trouble symptom:The auto headlight beam leveler does not operate.CAUTION:Initi ...
Tire pressure monitoring system (TPMS) (U.S.-spec. models)
The tire pressure monitoring system (TPMS) in the Subaru Ascent is designed to
continuously monitor tire pressure and alert the driver when one or more tires are
significantly underinflated. This system enhances safety by helping to reduce the
risk of tire-related incidents and ensuring op ...
Inspection mode Operation
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Inspection ModeOPERATIONIt is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is r ...
