Subaru Ascent 2018-2026 Owner's Manual: Temperature control

In the Subaru Ascent, temperature can be adjusted either through physical buttons or the touchscreen interface, allowing precise control of cabin conditions.

Temperature control buttons: Press the blue side to decrease temperature (cooling) or the red side to increase temperature (heating).

Temperature control screen:

1. Touch the climate control mode indicator to open the temperature interface.

2. Adjust the temperature using one of the following methods:

• Slide your finger along the temperature control bar
• Tap " "/" "
• Select the desired value directly on the temperature scale

Max A/C mode

For rapid cooling inside the Subaru Ascent, activate MAX A/C mode by selecting it from the climate control mode icon or customizable shortcut.

When enabled, the Subaru Ascent automatically adjusts several parameters for maximum cooling performance:

• The air conditioning system turns on immediately
• The temperature is set to the lowest possible level
• The fan speed increases to maximum output
• The air inlet switches to recirculation mode for faster cooling
• The airflow is directed through the front ventilation outlets

To exit MAX A/C mode and restore previous settings, simply tap "MAX A/C" again.

SYNC mode

• When SYNC mode is activated in the Subaru Ascent, the climate settings for the front passenger and rear passengers (if rear climate control is active) are automatically aligned with the driver’s settings. This includes:
  • Temperature synchronization for all zones
  • Airflow mode adjustment for rear passengers
  • Fan speed coordination for rear climate system
• If the SYNC icon is displayed, tap it to enable or disable synchronization.
• If another function is shown instead, access the climate control menu and select SYNC manually.

When SYNC mode is active in the Subaru Ascent, the SYNC indicators (including rear SYNC when applicable) will illuminate, confirming synchronized operation.

To deactivate SYNC mode, tap the SYNC icon again or manually adjust the front passenger temperature. Adjusting rear climate settings will cancel synchronization only for the rear system.

Fan speed control

To adjust airflow intensity in the Subaru Ascent, select the desired fan speed using the touchscreen controls.

Select the preferred fan speed by touching or on the climate control display.

The manual climate control system in the Subaru Ascent provides precise customization, allowing drivers to fine-tune airflow, temperature, and fan speed to match personal comfort preferences and changing driving conditions.