1. An option menu screen is displayed
when you touch the
tab on the
lower
left side of the screen. The "Options"
screen will appear.

Option menu screen
| No. | Function |
| 1 | Set the lock function of each channel.
Input the password is necessary for operation. |
| 2 | Set the password of the lock function. |
2. A password input screen is displayed when you touch the "Set" key of the Channel Lock function.

Password input screen
3. When the input password is approved, change to the lock channel selection screen.

Lock channel selection screen
4. In the channel list, touch the channel that should be locked.
Direct Tune
Displaying the Radio IDGeneral diagnostic table Inspection
LAN SYSTEM (DIAGNOSTICS) > General Diagnostic TableINSPECTIONItemOperationSpecificationsNoteYESNODiagnostic codeDTC is displayed when inspecting all DTCs.Perform the diagnosis according to DTC.System is normal. — SpeedometerFaster vehicle speed than the actual speed is displayed.VDC CM data may ...
Dtc p014d a/f / o2 sensor slow response - lean to rich bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P014D A/F / O2 SENSOR SLOW RESPONSE - LEAN TO RICH BANK 1 SENSOR 1NOTE:For the diagnostic procedure, refer to DTC P014C. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P014C A/F / O2 SENSOR ...
System operation
The alarm system will sound the following
alarms when triggered.
The vehicle's horn will sound for 30
seconds.
The hazard warning flashers will flash
for 30 seconds.
If any of the doors or the rear gate remains
open after the 30-second period, the horn
will continue to sound for a ma ...