Some parts of the audio/visual system can be adjusted using the switches on the steering wheel.
Mode | Operation | Function |
Except list screen | Press | Volume up/down |
Press and hold | Volume up/down continuously | |
List screen | Press | Move cursor up/down |
Pandora main screen (if equipped) | Press and hold | "+" switch is thumb up/"−" switch is thumb down |
Mode | Operation | Function |
AM/FM Radio, SiriusXM (if equipped) | Press | Preset channel up/down |
Press and hold | Seek up/down continuously while the switch is being pressed | |
aha | Press | Content up/down |
Press and hold | Reverse the current content item for 15 seconds/ Fast forward the current content item for 30 seconds | |
Audio CD, MP3/WMA/AAC disc, USB, iPod, BT audio | Press | Select a track/file |
Press and hold | Fast forward/rewind | |
Pandora (if equipped) | Press and hold | Thumbs up |
List screen | Press | Move cursor left/right |
Mode | Operation | Function |
List screen | Press | Select cursor entry |
CD, USB, iPod, BTaudio, Pandora (if equipped), aha | Press | Pause or play back |
AM/FM radio, AUX, SiriusXM (if equipped) | Press | Mute or cancel mute |
Mode | Operation | Function |
All (except for SUBARU STARLINK) | Press | Return to the previous screen |
All | Press and hold | Return to the HOME screen |
Mode | Operation | Function |
All (except for SUBARU STARLINK) | Press | Show list screen |
Mode | Operation | Function |
All | Press | Change audio modes |
NOTE
In the aha, Pandora (if equipped) and SUBARU STARLINK (if equipped) mode, some operation may be done on the screen depend on the selected APPS.
Dtc p0011 "a" camshaft position - timing over-advanced or system performance bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0011 "A" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 1DTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Engine sta ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > FRESH/RECIRC Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the FRESH/RECIRC switch to check that the link operates normally.3. If it does not operate normally as t ...
Dtc b28a5 engine torque limiter control prohibit
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28A5 ENGINE TORQUE LIMITER CONTROL PROHIBITDetected when abnormal data is transmitted from stereo camera to engine control module (ECM) and the engine control module (ECM) prohibits the AT rapid start prevention ...