GLASS/WINDOWS/MIRRORS > Rearview Mirror
REMOVAL
CAUTION:
• Be careful not to damage the mirror surface and the glass - front window.
• Do not remove the base - inner mirror from the glass - front window.
1. Release the claws, and then remove the cover.

2. Release the lock lever, and slide the mirror assembly - inner rearview to remove.

3. If the base - inner mirror is damaged, replace it together with the glass - front window.
Inspection
InstallationContinuously variable transmission
WARNING
Never shift the Subaru Ascent transmission from "P" or "N" into "D" or "R"
while pressing the accelerator pedal. This can cause sudden and uncontrolled vehicle
movement.
CAUTION
Follow these precautions when operating the Subaru Ascent transm ...
Removal
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingREMOVAL1. Lift up the vehicle, and then remove the rear wheels.2. Remove the axle nut.CAUTION:Do not loosen the axle nut while the rear axle is loaded. Doing so may damage the hub unit bearing.(1) Lift the crimped section of axle nut.(2) Remove the axle n ...
Electrical component location Location
ENGINE (DIAGNOSTICS)(H4DO) > Electrical Component LocationLOCATION1. CONTROL MODULE(1)Engine control module (ECM)(3)Malfunction indicator light(4)Data link connector(2)Delivery (test) mode fuse 2. SENSOR(1)Mass air flow and intake air temperature sensor(5)Crankshaft position sensor(9)Intake ca ...