Subaru Crosstrek Service Manual: Operation
TELEMATICS SYSTEM (DIAGNOSTICS) > Read Current Data
OPERATION
1. On «Start» display, select «Diagnosis».
2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
3. On «Main Menu» display, select «Each System».
4. On «Select System» display, select «Telematics» and then select «Enter».
5. On «Select Function» display, select «Data Monitor».
NOTE:
For detailed operation procedures, refer to “Application help”.
List
TELEMATICS SYSTEM (DIAGNOSTICS) > Read Current DataLISTDisplayContentReference valueUnitTrip Count [count]Refer to “LAN SYSTEM (DIAGNOSTICS)”. General Description > CAUTION"> ...
Other materials:
Removal
COOLING(H4DO) > Water Pipe AssemblyREMOVAL1. WATER PIPE ASSEMBLY RH1. Disconnect the ground cable from battery. NOTE">2. Drain engine coolant. Engine Coolant > REPLACEMENT">3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL">4. Disconnect the water hos ...
Installation
CONTROL SYSTEMS > Select LeverINSTALLATION1. Set the select lever assembly to the vehicle body.2. Tighten the four mounting bolts to attach the select lever assembly to the vehicle body.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)3. Connect the harness connector.4. Install the harness ...
Dtc b1011 battery control power supply
BODY CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1011 BATTERY CONTROL POWER SUPPLYDTC detecting condition:• Voltage failure caused by poor contact of battery power supply control circuit• Battery voltage of body integrated unit is not wit ...
