Subaru Crosstrek Service Manual: Operation

For detailed operation procedures, refer to “Application help”.

Subaru select monitor

Communication for initializing impossible

Other materials:

Protector tape Installation
EXTERIOR BODY PANELS > Protector TapeINSTALLATIONApply the protector tape by the following steps.1. REAR QUARTER PROTECTOR (MODELS WITHOUT SIDE GARNISH)(1)Apply the protector tape by aligning it to the rounded edge. 1. Clean the area around applying position to remove any foreign objects on bo ...

MT models
1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Depress the clutch pedal to the floor and shift the shift lever into neutral. Hold the clutch pedal to the floor while starting the engine. The starter motor will only operate when the clutch pedal is depress ...

Replacement
DIFFERENTIALS > Rear Differential Mount BushingREPLACEMENTCAUTION:• If there was so much rust in the rear differential mount bushing, remove the rust before starting work.• Apply the molybdenum grease on the square thread of the ST (shaft and nut) before use.1. Remove the rear differe ...