
To open: First unlock the rear gate lock then push the rear gate opener button.

To close: Lower the rear gate slowly and push down firmly until the latch engages.
The rear gate can be lowered easily if you pull it down holding the recessed grip.
WARNING
There is a danger of your hand being caught and injured.
CAUTION
That could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open.
NOTE
If the rear gate cannot be unlocked due to a discharged vehicle battery, a malfunction in the door locking/unlocking system or other causes, you can unlock it by manually operating the rear gate lock release lever. For the procedure, refer to "Rear gate - if the rear gate cannot be opened" 9-18.
Lock/unlock
Moonroof (if equipped)Dtc u0100 lost communication with ecm/pcm a
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0100 LOST COMMUNICATION WITH ECM/PCM “A”Detected when CAN data from the engine control module (ECM) does not arrive.NOTE:Perform the diagnosis for LAN system. Basi ...
Dtc c2552 motor relay
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2552 MOTOR RELAYTROUBLE SYMPTOM:• The steering wheel operation feels heavy.• STEERING warning light illuminates.NOTE:When this code is displayed, replace the power steeri ...
Procedure
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching ModePROCEDURECAUTION:• Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.• On completing the work in FWD, switch back in AWD.1. Shift the select lever to &l ...