Subaru Crosstrek Service Manual: Navigation body Note
ENTERTAINMENT > Navigation Body
NOTE
For the operation procedures for navigation assembly, refer to “Audio” section. Audio">
Microphone Note
ENTERTAINMENT > MicrophoneNOTEThe microphone is integrated in the spot map light or stereo camera cover.For operation procedures, refer to “LIGHTING SYSTEM” section. Spot Map Light&quo ...
Service diagnostics mode Operation
ENTERTAINMENT > Service Diagnostics ModeOPERATIONNOTE:Installed only to model with 7 inch display.1. PROCEDURE TO SWITCH TO SERVICE DIAGNOSTICS MODE1. Turn the ignition switch to ACC.2. After turni ...
Other materials:
Dtc p0977 shift solenoid "b" control circuit high
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0977 SHIFT SOLENOID "B" CONTROL CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTrouble symptom:Gear is not changed. (No down-shift)CAUTION:Use the check bo ...
Brake system warning light
In the Subaru Ascent, the brake system warning light illuminates when the parking
brake is engaged while the ignition switch is in the "ON" position. This is a normal
operational indication. Once the parking brake is fully released, the light should
turn off immediately, confirming t ...
Assembly
POWER ASSISTED SYSTEM (POWER STEERING) > Electric Power Steering GearboxASSEMBLY1. Install the tie-rod into rack.Tightening torque:90 N·m (9.18 kgf-m, 66.4 ft-lb)NOTE:Check the mating face of rack and tie-rod for foreign matter such as dust etc.2. Apply a coat of grease to the tie-rod groo ...
