The meter information screen in the Subaru Ascent can be flexibly customized, allowing the driver to switch between various data views depending on current driving needs and preferences. This intelligent display system is designed to provide clear, structured, and easily readable information while maintaining maximum driving safety.
ECO gauge

The ECO gauge in the Subaru Ascent visually represents the difference between the average fuel consumption (calculated since the last reset of the trip meter) and the real-time fuel consumption. This allows drivers to better understand their driving efficiency and adjust their driving style to achieve improved fuel economy.
The ECO gauge provides a dynamic indication of fuel efficiency, helping Subaru Ascent drivers maintain smoother acceleration and more economical driving habits, as illustrated in the reference chart below.

NOTE
Clock and outside temperature

This screen in the Subaru Ascent provides essential time and ambient temperature data, ensuring the driver remains informed about external conditions at all times.
NOTE
Compass (if equipped)

The built-in compass in the Subaru Ascent displays the current driving direction, assisting with navigation and orientation, especially in unfamiliar areas or off-road conditions.
Driving range on remaining fuel

NOTE
The displayed driving range in the Subaru Ascent is an estimate based on recent driving patterns and fuel consumption. Actual range may vary significantly depending on driving conditions, terrain, and driving style. It is strongly recommended to refuel promptly when the low fuel warning light is activated.
Basic operation
Telltale screenWheel alignment Inspection
REAR SUSPENSION > Wheel AlignmentINSPECTIONNOTE:Measure and adjust the front and rear wheel alignment at a time. Refer to “Wheel Alignment” in “FRONT SUSPENSION” section for measurement or adjustment of wheel alignment.• Inspection: Wheel Alignment > INSPECTION&q ...
Replacement of brake pad and lining
The disc brakes have audible wear
indicators on the brake pads. If the brake
pads wear close to their service limit, the
wear indicator makes a very audible
scraping noise when the brake pedal is
applied.
If you hear this scraping noise each time
you apply the brake pedal, have the brak ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower Resistor (Manual A/C Model)INSPECTION1. Check the resistance between resistor terminals.Preparation tool:Circuit testerTerminal No.StandardConnection diagram4 — 3Approx. 0.43 ?4 — 2Approx. 1.03 ?4 — 1Approx. 3 ?2. Replace the resistor if the ...