Subaru Ascent 2018-2026 Owner's Manual: Manual climate control operation for rear climate control
The Subaru Ascent allows rear passengers to adjust climate settings either through the rear climate control panel or via the central information display.
To access rear climate control settings on the display, tap the rear climate control mode indicator.
Locking and unlocking the rear climate control panel (if equipped)
To prevent unintended adjustments by rear passengers in the Subaru Ascent, the rear climate control panel can be locked using the central display.
Activate the lock by selecting "LOCK" on the rear climate control screen.
The lock indicator "
"
will appear on both the main display and the rear control panel, confirming that
the controls are disabled.
To restore rear passenger control, tap "LOCK" again to unlock the system.
Airflow mode selection
Rear airflow direction in the Subaru Ascent can be adjusted using either the rear control panel or the central display interface.
Available airflow modes include:
Ventilation: Air is directed through the rear vents toward passengers.
Heat: Warm air is directed toward the footwell area beneath the rear side trim.
Bi-level: Airflow is split between the rear vents and the lower foot outlets, balancing temperature distribution.
Temperature control
Rear passengers in the Subaru Ascent can adjust temperature using either the touchscreen interface or physical buttons on the rear control panel.
NOTE
- The available temperature range may differ depending on the regional version of the Subaru Ascent.
- If the front A/C system is turned off, the rear cabin may not reach the selected temperature due to reduced cooling capability.
Fan speed control
Fan speed for the rear climate system in the Subaru Ascent can be adjusted using the rear control panel buttons or through the central display interface.
To turn off the rear climate control system
To deactivate the rear climate system in the Subaru Ascent, use the ON/OFF control on the central display or press the corresponding button on the rear climate panel.
The Subaru Ascent climate control system is engineered to deliver flexible and efficient temperature management for all passengers, combining intuitive controls with advanced functionality for enhanced comfort in every driving condition.
Air conditioner control
In the Subaru Ascent, the air conditioning system functions only when the engine
is running, ensuring stable performance and proper cooling efficiency.
To activate the air conditioner, make sure th ...
Front seat heater and ventilation
Front seat heater
In the Subaru Ascent, the front seat heating system is designed to provide enhanced
comfort during cold weather and operates only when the ignition switch is in the
"ON&quo ...
Other materials:
Active test Operation
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Active TestOPERATIONCAUTION:• Be sure to perform the active test while the engine is not running.• After executing the active test, execute the Clear Memory Mode.1. On «Start» display, select «Diagnosis».2. On «Vehicle selection ...
Installation
SECURITY AND LOCKS > Impact SensorINSTALLATION1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. Disconnect the ground cable from battery. NOTE">5. In ...
Cooling and dehumidifying in high humidity and low temperature weather
conditions
Under certain weather conditions (high
relative humidity, low temperatures, etc.) a
small amount of water vapor emission
from the air outlets may be noticed. This
condition is normal and does not indicate
any problem with the air conditioning
system.
Air conditioner compressor shut-off when e ...
