Subaru Crosstrek Owners Manual: Interruption screen
Warning information (display example)
Useful messages, such as reminder information, vehicle information, warning information, etc. may interrupt the current screen and appear on the display accompanied by a beep. Take proper action according to the message.
The warning screen will return to the original screen after a few seconds.
Self-check screen
When the ignition switch is turned to the
"ON" position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several second ...
Basic screens
...
Other materials:
Update contacts from phone
Operation methods differ between PBAP
(Phone Book Access Profile) compatible
and PBAP incompatible but OPP (Object
Push Profile) compatible Bluetooth
phones.
1. Display the "PHONE" screen. Refer to
"How to change the hands-free phone system" F5-73.
2. Touch the "Contacts" key, and then
s ...
Removal
LIGHTING SYSTEM > Rear Turn Signal Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear com ...
Dtc b19f2 short in front p/t 2 rh (to ground)
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B19F2 SHORT IN FRONT P/T 2 RH (TO GROUND)Diagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Lap seat belt pretensioner (RH) circuit is shorted to ground.• Lap seat belt pretensioner ( ...
