Subaru Crosstrek Service Manual: Installation
WIPER AND WASHER SYSTEMS > Wiper Blade
INSTALLATION
1. Install each part in the reverse order of removal.
2. Confirm that the clip is locked securely.
Inspection
WIPER AND WASHER SYSTEMS > Wiper BladeINSPECTION1. Check and clean the rubber assembly - wiper.CAUTION:• Do not use organic solvent-based cleaner when cleaning rubber parts in order to avoid ...
Wiring system
...
Other materials:
Inspection
COMMUNICATION SYSTEM > Horn SwitchINSPECTION1. CHECK HORN SWITCHCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Turn the ignition switch to OFF.2 ...
General diagnostic table Inspection
BRAKE > General Diagnostic TableINSPECTION Trouble and possible causeCorrective action1. Insufficient braking(1) Fluid leakage from the hydraulic mechanismRepair or replace. (cup, piston seal, piston boot, master cylinder piston kit, pipe or hose)(2) Entry of air into the hydraulic mechanismBleed ...
Removal
LIGHTING SYSTEM > Rear Combination Light AssemblyREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear ...
