Subaru Crosstrek Service Manual: Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater Core
INSTALLATION
CAUTION:
• Replace O-rings and clamps with new parts and install securely.
• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">
1. Install each part in the reverse order of removal.
2. Fill engine coolant. Engine Coolant > REPLACEMENT">
3. Charge refrigerant. Refrigerant Charging Procedure > PROCEDURE">
Heater core
...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater CoreREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRB ...
Other materials:
Inspection
LIGHTING SYSTEM > Ignition Switch IlluminationINSPECTIONSTEPCHECKYESNO1.CHECK THE IGNITION SWITCH ILLUMINATION.Make sure the ignition switch illumination illuminates when driver’s side door is open.Does the ignition switch illumination illuminate?Ignition switch illumination is normal. Igni ...
System block diagram
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Control Module I/O SignalSYSTEM BLOCK DIAGRAM• Blind Spot Detection/Rear Cross Traffic Alert system consists of the following.• There is a control ECM in the radar sensor main body, which performs the vehicle identification ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyREMOVAL1. Release the fuel pressure. Fuel > PROCEDURE">2. Disconnect the ground cable from battery.3. Remove the intake manifold. Intake Manifold > REMOVAL">4. Disconnect the connector (A) from the tumble ...
