ENTERTAINMENT > Front Accessory Power Supply Socket
INSTALLATION
CAUTION:
• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.
• Before handling the airbag system components, always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”.
Install each part in the reverse order of removal.
NOTE:
Align the grooves of the holder with the claws of accessory power supply socket.
Dtc c1711 steering angle sensor
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1711 STEERING ANGLE SENSORDTC detecting condition:Defective steering angle sensorTrouble symptom:• ABS does not operate.• VDC does not operate.• Hill start assist does not ...
Removal
EXTERIOR/INTERIOR TRIM > Front GrilleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front. Front Bumper > REMOVAL">3. Remove the front grille assembly.(1) Remove the screws from the back side of the bumper face - front.(2) Release the cl ...
Inspection
SECURITY AND LOCKS > Steering Lock CMINSPECTION1. Check if the steering lock is released when you start the engine using the push button ignition switch.2. If the system does not operate normally as the result of inspection, refer to “General Diagnostic Table” of the “KEYLESS AC ...