TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > General Description
INSPECTION
Before performing diagnosis, check the following item which might affect the quality of the tire pressure monitoring system.
1. TIRE
• Inspect that the tire pressure is within the specification while the tire is cool. (Refer to Tire Caution Label.)
• Check the tires for damage or the insertion of foreign matters.
2. BATTERY
Check the battery. Battery">
Preparation toolAssembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Case and Extension Case AssemblyASSEMBLY1. EXTENSION CASE1. Using the ST, install the oil seal to the extension case. Oil Seal">NOTE:Use a new oil seal.2. Install the dust cover.3. Install the shift bracket.Tightening torque:24.5 N&mid ...
Inspection
LIGHTING SYSTEM > Ignition Switch IlluminationINSPECTIONSTEPCHECKYESNO1.CHECK THE IGNITION SWITCH ILLUMINATION.Make sure the ignition switch illumination illuminates when driver’s side door is open.Does the ignition switch illumination illuminate?Ignition switch illumination is normal. Igni ...
List
EyeSight (DIAGNOSTICS) > Diagnostic Code(s) DisplayLIST• List of Diagnostic Trouble Code (DTC)DTCItemContents of diagnosisReferenceU0073CONTROL MODULE COMMUNICATION BUS OFFDetected when bus off status (the stereo camera detects the failure and is disconnected from CAN line) occurs. Diagnost ...