Subaru Crosstrek Service Manual: Inspection
LUBRICATION(H4DO) > Oil Pressure Switch
INSPECTION
1. Check that the oil pressure switch does not have deformation, cracks or damage.
2. Check that there are no oil leaks or oil oozing from the oil pressure switch installation portion.
Removal
LUBRICATION(H4DO) > Oil Pressure SwitchREMOVALCAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.1. Disconnect ...
Other materials:
Dtc p0068 map/maf - throttle position correlation
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0068 MAP/MAF - THROTTLE POSITION CORRELATIONDTC detecting condition:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode ...
Operating conditions
The Reverse Automatic Braking (RAB) system in the Subaru Ascent is engineered
to function only when a specific set of operating conditions is satisfied. These
requirements ensure that the system delivers accurate detection and reliable braking
assistance while reversing.
EyeSight warni ...
Inspection
WIPER AND WASHER SYSTEMS > Wiper and Washer SystemINSPECTIONSymptomsRepair orderWiper and washers do not operate.(1) Wiper fuse (F/B No. 14, 15)(2) Combination switch(3) Motor assembly - wiper(4) Wiring harnessWipers do not operate in LO or HI.(1) Combination switch(2) Motor assembly - wiper(3) W ...
