INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > General Description
INSPECTION
Before performing the diagnosis, check the following items which may cause problems relating the wiper or light.
1. Check the battery. Battery">
2. Check the fuse condition.
3. Check the connecting condition of harness and harness connector.
Preparation toolBasic diagnostic procedure Procedure
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURENOTE:When the sunload sensor check is performed indoors or in the shade, it could be diagnosed as sensor having an open circuit. Always perform the inspection in direct sunlight.STEPCHECKYESNO1.START INSPECTIONS.1) Prepare ...
Disassembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Case and Extension Case AssemblyDISASSEMBLY1. TRANSFER CASE1. Remove the reverse check sleeve assembly. Reverse Check Sleeve > REMOVAL">2. Remove the oil guide.3. Remove the oil seal.4. Set ST1, ST2 and transfer case to a press.NOTE ...
Refrigerant charging procedure Procedure
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Charging ProcedurePROCEDURECAUTION:• While working, be sure to wear protective goggles and protective gloves.• Air in the cycle can cause insufficient air conditioning, and water in the cycle can cause clogging in the cycle (icing ...