HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Air Conditioning System
INSPECTION
Refer to “Basic Diagnostic Procedure” for “HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS)” section. Basic Diagnostic Procedure">
Select lever/gear position indicator (CVT models)
Type A
Upshift indicator
Downshift indicator
Select lever/gear position indicator
Type B
Upshift indicator
Downshift indicator
Select lever/gear position indicator
This indicator shows the position of the
select lever.
When the manual mode is selected, the
gear pos ...
Initialization of power window
If the vehicle's battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
One-touch auto up/down function
Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
...
Preparation tool
CONTROL SYSTEMS > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, refer to “A ...