Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission Case

INSPECTION

Check the transmission case for damage.

Check for leakage of CVTF from the connection between converter case and transmission case.

Check the bearing for smooth operation.

Check the bearing for seizure or wear.

Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission CaseDISASSEMBLY1. Remove the oil stopper plate.2. Remove all plugs from the transmission case.3. Remove the oil seal using a screwdriver wra ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission CaseINSTALLATION1. Clean the mating surface of transmission case and converter case.2. Select the reduction gear shim. Reduction Drive Gear ...

Other materials:

Inspection
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD)INSPECTION1. MULTI-FUNCTION DISPLAY SWITCH1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard2 — 3 (UP)ENTER (DOWN)All OFF1 M? or more (UP)ONLess than 1 ?ENTERONA ...

Basic diagnostic procedure Procedure
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Before performing all diagnostics or cruise control diagnostics, always start the engine and make sure that the initial illumination of the ABS/VDC warning light has been ended. (If you start the diagnostics ...

Most common causes of corrosion
The most common causes of corrosion are: The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. Damage to paint and other protective coatings caused by gravel and stone chips or minor accidents. Corrosion is accelerated on the vehic ...

© 2016-2023 Copyright www.sucross.com