Subaru Ascent 2018-2026 Owner's Manual: High/low beam change (dimmer)
- High beam
- Low beam
In the Subaru Ascent, switching between high beam and low beam headlights is performed using the dimmer control integrated into the turn signal lever. This system allows the driver to quickly adapt lighting intensity depending on road conditions, visibility, and oncoming traffic.
When the high beam is activated in the Subaru Ascent, the corresponding high
beam indicator light "
"
will illuminate on the combination meter, providing clear visual confirmation to
the driver.
Headlight flasher
CAUTION
Avoid holding the lever in the flashing position for extended periods. Prolonged activation may place unnecessary load on the electrical system of the Subaru Ascent.
To activate the headlight flasher function in the Subaru Ascent, pull the lever toward you and then release it. The high beam headlights will remain illuminated only while the lever is held in position, making this function ideal for briefly signaling other drivers or improving visibility momentarily.
When using the headlight flasher or when the high beam is engaged, the high beam
indicator light "
"
will also illuminate on the instrument cluster, ensuring the driver is always aware
of the current lighting mode.
The Subaru Ascent lighting control system is designed to provide precise and responsive operation, allowing drivers to adjust visibility instantly while maintaining full control and awareness in varying driving conditions.
Headlights
For U.S. models
For Canada models
In the Subaru Ascent, the headlight system is controlled using the rotary knob
located at the end of the turn signal lever. By rotating this control, the ...
High beam assist function
NOTE
The high beam assist function in the Subaru Ascent operates using a
stereo camera mounted near the front map light area, allowing the system to
continuously monitor road conditions ahea ...
Other materials:
Temperature control
Type A
Turn the temperature control dial over a
range from the blue side (cool) to red side
(warm) to regulate the temperature of
airflow from the air outlets.
Type B, C and D
Turn the temperature control dial to set the
preferred interior temperature. With the
dial set to your preferred tem ...
Replacement
COOLING(H4DO) > Engine CoolantREPLACEMENT1. DRAINING OF ENGINE COOLANT1. Turn the ignition switch to OFF.2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL">4. Remove the drain plug to drain engine coolant into container.NOTE:Remove the radiator cap so that ...
Type B
1. Turn the airflow mode selection dial
and fan speed control dial to the "AUTO"
position.
2. Set the preferred temperature using
the temperature control dial.
NOTE
Each function can be individually
set to the AUTO mode independently of
the other functions. Any function set to
the A ...
