Subaru Crosstrek Owners Manual: Features
The multi function display has the following functions.
Description
Displays useful messages, such as warning information, etc.
Displays basic screens (e.g. fuel consumption screen, etc.)
Sets and adjusts maintenance notification
Registers driving history
Sets and customizes car operation
Also, the multi function display can also be used to set and initialize the multi function display itself.
NOTE
When the vehicle is in motion, certain functions and selections may not be available.
Models without multi function display
NOTE
For models with information display
(black and white), refer to "Information
display"
The U.S.-spec models are not equipped
with the multi function display. The other
models may be equipped ...
Locations
Multi function display
Outside temperature indicator
Top display (For the display setting, refer
to "Top display setting"
Clock
Driving information display (For the displayed
content ...
Other materials:
Inspection
ENTERTAINMENT > Rearview Camera SystemINSPECTION1. Park the vehicle at the level place where there are enough area at the rear of the vehicle.2. Attach the tape as the target point for standard at the floor rearward of the vehicle as shown in the figure below.NOTE:Standard tape width is about 30 ...
Dtc b27a2 passenger side external antenna open
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B27A2 PASSENGER SIDE EXTERNAL ANTENNA OPENDTC detecting condition:When open circuit occurs in the harness between keyless access CM and passenger’s side front door outer h ...
Removal
LIGHTING SYSTEM > Front Fog Light BulbREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the screw and clips, and turn over the front side of the mud guard - front.3. From the bottom of the bumper face - front, remove the front fog light bulb.CAUTION:Use a dry clean clot ...
