TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE
Detected when CAN data is not received from body integrated unit.
NOTE:
Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE">
Dtc u0122 lost communication with vehicle dynamics control module
Dtc u0151 lost communication with restraints control moduleSelf-check screen
When the ignition switch is turned to the
"ON" position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several seconds each.
Engine oil: Checks the interval of engine
oil replacement.
Oil filter: Checks th ...
Assembly
BRAKE > Rear Disc Brake AssemblyASSEMBLY1. Before installation, check each part. Rear Disc Brake Assembly > INSPECTION">2. Clean the inside of the caliper body cylinder using brake fluid.3. Apply a coat of brake fluid to piston seal and install the piston seal to the caliper body cyli ...
Removal
WIPER AND WASHER SYSTEMS > Combination Switch (Wiper)REMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - column.(1) Release the clips, and remove the cover assembly - steering UPR.(2) Remove the screws by turning the steering wheel to right and left.( ...