Subaru Crosstrek Service Manual: Dtc c1321 fl hold valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C1321 FL HOLD VALVE
NOTE:
For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL CLOSING VALVE 2">
Dtc c1312 fr pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1312 FR PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C136 ...
Dtc c1322 fl pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1322 FL PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C136 ...
Other materials:
Installation
MECHANICAL(H4DO) > Crank PulleyINSTALLATION1. Degrease the press-fit section for the chain cover front oil seal, and install the front oil seal to the chain cover using ST.CAUTION:Do not apply fluid such as engine oil to the front oil seal and the chain cover; otherwise engine oil leakage may occ ...
Fuses
CAUTION
Never replace a blown fuse in your Subaru Ascent with one of a higher rating
or with non-approved materials. Doing so may result in serious electrical damage
or even fire.
NOTE
Each fuse in your Subaru Ascent is labeled with its rating and corresponding
circuit on the inside of the ...
Caution
SEAT BELT SYSTEM > General DescriptionCAUTIONFor details of the following precautions for seat belt pretensioner, refer to “AIRBAG SYSTEM” section. General Description > CAUTION">• Before performing vehicle maintenance, turn the ignition switch to OFF and wait for 60 ...
