EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B28AB STEREO CAMERA MICROCOMPUTER 2
Detected when communication error occurs due to malfunction of microcomputer inside the stereo camera.
DTC DETECTING CONDITION:
Communication error occurs due to malfunction of microcomputer inside the stereo camera.
TROUBLE SYMPTOM:
All functions of EyeSight system do not operate.
Refer to DTC B28A6 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A6 INTERNAL STEREO CAMERA COMMUNICATION 1">
Dtc b28aa stereo camera microcomputer 1
Dtc b28ac stereo camera asicInspection
BODY CONTROL SYSTEM (DIAGNOSTICS) > General DescriptionINSPECTIONBefore performing diagnosis, check the following items which might affect body control system problems.1. Check the battery. Battery">2. Check the fuse condition.Make sure that ampere of the fuse is setting value, and it is ...
Coolant temperature low indicator light/Coolant temperature high warning
light
CAUTION
After turning the ignition switch
to the "ON" position, if this
indicator light/warning light behaves
in any of the following
ways, the electrical system may
be malfunctioning. Contact your
SUBARU dealer immediately for
an inspection.
It remains blinking in RED.
It remains il ...
Removal
EXTERIOR/INTERIOR TRIM > Front GrilleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front. Front Bumper > REMOVAL">3. Remove the front grille assembly.(1) Remove the screws from the back side of the bumper face - front.(2) Release the cl ...