Subaru Crosstrek Service Manual: Dtc b280b vdc brake fluid pressure
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B280B VDC BRAKE FLUID PRESSURE
Detected when error occurs in the VDC. (VDC brake control malfunction 2)
NOTE:
Check the VDC. Basic Diagnostic Procedure > PROCEDURE">
Dtc b280a vdc echo back disagreement
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B280A VDC ECHO BACK DISAGREEMENTDetected when error occurs in the VDC. (VDC brake control malfunction 1)When lost ...
Dtc b280f combination meter malfunction
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B280F COMBINATION METER MALFUNCTIONMalfunction is detected in the combination meter.DTC DETECTING CONDITION:Defec ...
Other materials:
Rear combination lights
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
2. Slide the rear combination light as-
11-38
sembly rearward and remove it from the
vehicle.
Rear side marker light
Rear turn signal light
Backup light
Sto ...
Wiring diagram
CONTROL SYSTEMS > AT Shift Lock Control SystemWIRING DIAGRAM1. MODEL WITHOUT PUSH BUTTON IGNITION SWITCH(1)Ignition switch(5)TCM (shift range information)(9)Battery(2)Stop light and brake switch(6)Key lock solenoid(10)ECM (delivery (test) mode signal)(3)Key warning switch(7)Shift lock solenoid(11 ...
Removal
LIGHTING SYSTEM > Rear Height SensorREMOVALCAUTION:Always remove the sensor assembly - headlight beam leveler before removing any parts related to the suspension.1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and remove the left rear wheel.3. Remove the sensor ...
