Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc b2809 vdc malfunction

EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC B2809 VDC MALFUNCTION

Detected when error occurs in the VDC. (VDC failure)

When lost communication with vehicle dynamics control and vehicle dynamics control module abnormal or VDC echo back disagreement occur simultaneously, perform diagnosis for lost communication with vehicle dynamics control first.

NOTE:

Check the VDC. Basic Diagnostic Procedure > PROCEDURE">

Dtc b2807 ecm abnormal
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2807 ECM ABNORMALDetected when cruise indicator illumination request from ECM and ON/OFF information of cruise f ...

Dtc b280a vdc echo back disagreement
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B280A VDC ECHO BACK DISAGREEMENTDetected when error occurs in the VDC. (VDC brake control malfunction 1)When lost ...

Other materials:

System maintenance
NOTE For models without "keyless access with push-button start system": In the event that the vehicle's battery is replaced, discharged or disconnected, it will be necessary to start the vehicle a minimum of one time using the key prior to activating the remote engine start system. This is r ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Wiring HarnessREMOVAL1. Release the fuel pressure. Fuel > PROCEDURE">2. Disconnect the ground cable from battery.3. Remove the intake manifold. Intake Manifold > REMOVAL">4. Disconnect the connector from the engine.• Struc ...

Assembly
DRIVE SHAFT SYSTEM > Front Drive ShaftASSEMBLY1. Roll up a thick piece of paper to a size where the shaft can pass through, and affix with tape to form a cylinder.2. Attach a new O-ring on this cylinder.CAUTION:• Always use a new O-ring.• Be careful that the O-ring does not become scr ...

© 2016-2025 Copyright www.sucross.com