Subaru Crosstrek Service Manual: Adjustment

NOTE:

When replacing the transmission case with a new part, perform the following check and adjustment for the selection.

• Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT">

• Select the transfer drive gear shim. Reduction Driven Gear > ADJUSTMENT">

• Select the reduction drive gear shim. Reduction Drive Gear > ADJUSTMENT">

Transmission case

Removal

Other materials:

Dtc u0428 invalid data received from steering angle sensor module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0428 INVALID DATA RECEIVED FROM STEERING ANGLE SENSOR MODULEDTC DETECTING CONDITION:Defective data was transmitted from steering angle sensor.TROUBLE SYMPTOM:VDC CM does not operate normally.STEPCHECKYESNO1.CHE ...

Dtc b2782 steering lock drive request signal correlation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2782 STEERING LOCK DRIVE REQUEST SIGNAL CORRELATIONDTC detecting condition:When the open or short circuit in the steering lock motor power supply circuit is detected.Trouble sy ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Sub Level SensorREMOVALWARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• Catch the fuel from the tubes using a container or cloth.• If the fuel gauge indicates that two third ...