ENTERTAINMENT > Rear Accessory Power Supply Socket
INSTALLATION
Install each part in the reverse order of removal.
NOTE:
Align the grooves of the holder with the claws of accessory power supply socket.

Wiring diagramOperation
EyeSight (DIAGNOSTICS) > Freeze Frame Data DisplayOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select  ...
Rear gate - if the rear gate cannot be opened
In the event that you cannot open the rear
gate by operating the rear gate opener
button, you can open it from inside the
cargo area.
1. Remove the access cover at the
bottom-center of the rear gate trim using
a flat-head screwdriver wrapped with vinyl
tape or a cloth.
2. Locate the re ...
Removal
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD)REMOVAL1. MULTI FUNCTION DISPLAY1. Disconnect the ground cable from battery. NOTE">2. Remove the center grille assembly. Air Vent Grille > REMOVAL">3. Release the claw and hook, and then remove the cover center UPR.NOT ...