
To open the glove box, pull the handle. To close it, push the lid firmly upward.
To lock the glove box, insert the key and turn it clockwise. To unlock the glove box, insert the key and turn it counterclockwise.
For models with "keyless access with push-button start system", use the mechanical key to lock or unlock the glove box.
NOTE
The mechanical key is directional. If the key cannot be inserted, change the direction that the grooved side is facing and insert it again.
Storage compartment
Center consoleRemoval
BRAKE > Brake HoseREMOVAL1. FRONT BRAKE HOSE1. Disconnect the brake pipe (b) from the brake hose (a).Preparation tool:Flare nut wrench2. Remove the clamp, strut mounting bolt and union bolt, and remove the front brake hose.2. REAR BRAKE HOSE1. Remove the brake hose bracket bolt and union bolt.2. ...
Dtc p0111 intake air temperature sensor 1 circuit range/performance bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0111 INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT RANGE/PERFORMANCE BANK 1DTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Improper idling• Poor d ...
Dtc b2271 ign relay control circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2271 IGN RELAY CONTROL CIRCUITDTC detecting condition:• When malfunction is detected in IG1 and IG2 drive circuits in the keyless access CM.• When malfunction is de ...