Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Parking pawl

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainINSTALLATION1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a ...

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Parking PawlINSPECTION• Check the parking pawl for breakage or damage.• Check for worn, broken and/or damaged return spring. ...

Other materials:

Dtc b2274 acc relay control circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2274 ACC RELAY CONTROL CIRCUITDTC detecting condition:When malfunction is detected in ACC relay drive circuit in the keyless access CM or external circuit.Trouble symptom:Each ...

Checking the oil level
1. Park the vehicle on a level surface and turn the ignition switch to the "LOCK"/ "OFF" position. If you check the oil level just after turning the ignition switch to the "LOCK"/"OFF" position, wait a few minutes for the oil to drain back into the oil pan before checking the level. Oi ...

Assembly
DRIVE SHAFT SYSTEM > Rear Drive ShaftASSEMBLYCAUTION:Wrap shaft splines with vinyl tape to protect the boot from scratches.NOTE:Use specified grease.Grease:BJ, EBJ side: NKG814DOJ side: NKG8141. Install the inner race to the shaft.(1) Install the boot (BJ) or boot (EBJ) in the specified position, ...

© 2016-2024 Copyright www.sucross.com