Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Locking and unlocking with "keyless access" entry function

Subaru Crosstrek Owners Manual / Keys and doors / Keyless access with push-button start system (if equipped) / Locking and unlocking with "keyless access" entry function

Radio waves used for the keyless access with push-button start system
The keyless access with push-button start system uses radio waves of 134 kHz, in addition to the radio waves used for the remote keyless entry system. The radio waves are periodically output from ...

Operating ranges
Antenna Operating range The operating range of the door locking/ unlocking function is approximately 16 to 32 in (40 to 80 cm) from the respective door handle. The operating ran ...

Other materials:

Preparation for overhaul Procedure
MECHANICAL(H4DO) > Preparation for OverhaulPROCEDURE1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure.NOTE:When using a commercially sold engine stand, follow the instructions of engine stand used.Tightening torque:35 N·m (3.6 kgf-m, 25. ...

Removal
SECURITY AND LOCKS > Impact SensorREMOVAL1. Pull out the key from the ignition switch, or turn off the power.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. Disconnect the ground cable from battery. NOTE">5. Remove the impact se ...

Dtc u0122 lost communication with vehicle dynamics control module
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULEDetected when CAN data (vehicle speed signal) is not received from VDC.NOTE:Perform the diagnosis for LAN system. Basic Diagn ...

© 2016-2019 Copyright www.sucross.com