Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: General description

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching Mode

GENERAL DESCRIPTION

Follow the messages displayed on the Subaru Select Monitor when working.

Perform as necessary in FWD mode.

When switched to FWD, AWD light illuminates.

Procedure
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching ModePROCEDURECAUTION:• Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link ...

Control valve body
...

Other materials:

Installation
MECHANICAL(H4DO) > Cylinder BlockINSTALLATION1. Apply engine oil to the crankshaft bearing, and install the crankshaft bearing to the cylinder block.CAUTION:• Place a wood board wrapped with a waste cloth to prevent the knock pin damage and to stabilize the cylinder block before work.• ...

Installation
DRIVE SHAFT SYSTEM > Rear AxleINSTALLATION1. Temporarily tighten the rear axle housing to the upper arm assembly.2. Install the rear drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the h ...

Dtc b28a7 stereo camera recognition(target)
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28A7 STEREO CAMERA RECOGNITION(TARGET)Detected when error occurs in the communication data inside the control module caused by external factors such as noises.NOTE:If the same DTC is still detected after the engi ...

© 2016-2021 Copyright www.sucross.com