Subaru Crosstrek Owners Manual: Charge warning light
If
this light illuminates when the engine is
running, it may indicate that the charging
system is not working properly.
If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the alternator belt. If the belt is loose, broken or if the belt is in good condition but the light remains illuminated, contact your nearest SUBARU dealer immediately.
Coolant temperature low indicator light/Coolant temperature high warning
light
CAUTION
After turning the ignition switch
to the "ON" position, if this
indicator light/warning light behaves
in any of the following
ways, the electrical system may
be malfunctioning. Contact ...
Oil pressure warning light
If
this light illuminates when the engine is
running, it may indicate that the engine oil
pressure is low and the lubricating system
is not working properly.
If the light illuminates while d ...
Other materials:
Installation
WIPER AND WASHER SYSTEMS > Rear Wiper ArmINSTALLATION1. Install in the reverse order of removal.2. Operate the rear wiper once.3. Align the blade assembly - rear wiper with the marking on the glass, and then tighten the nut to the specified torque.Tightening torque:8 N·m (0.82 kgf-m, 5.9 f ...
Connecting and disconnecting a USB memory/portable device
The USB port and the AUX jack are
located as shown in the following illustration.
NOTE
This unit does not support commercially
available USB hubs.
Turn on the power of the device
when it is not turned on.
This device has a USB port for USB
memory/portable device.
For compatible ...
Procedure
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching ModePROCEDURECAUTION:• Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.• On completing the work in FWD, switch back in AWD.1. Shift the select lever to &l ...