POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Control Module I/O Signal
WIRING DIAGRAM
(1) | Battery | (5) | Engine control module (ECM) | (9) | Torque sensor (main & sub) |
(2) | Ignition switch | (6) | Power steering control module | (10) | CAN communication |
(3) | STEERING warning light (combination meter) | (7) | Motor | (11) | VDC CM |
(4) | Data link connector (for Subaru Select Monitor) | (8) | Resolver sensor | (12) | Steering gearbox |
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer ClutchREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the extension case. Extension Case > REMOVAL">3. Remove the transfer clutch assembly.4. Remove the t ...
Unlocking the doors
Press the unlock/disarm button to unlock
the driver's door. An electronic chirp will
sound twice and the hazard warning
flashers will flash twice. To unlock all
doors and the rear gate, briefly press the
unlock/disarm button a second time within
5 seconds.
NOTE
If the interval between the fi ...
Fuel economy hints
The following suggestions will help to save
fuel.
Select the proper gear position for the
speed and road conditions.
Avoid sudden acceleration or deceleration.
Always accelerate gently until you
reach the desired speed. Then try to
maintain that speed for as long as
possible.
Do ...