Subaru Crosstrek Owners Manual: When checking or servicing in the engine compartment
CAUTION
- Do not contact the drive belt
cover while checking the components
in the engine compartment.
Doing so may cause your hand to slip off the cover and result in an unexpected injury.
- Do not touch the oil filter until the engine has cooled down
completely.
Doing so may result in a burn or other injury. Note that the oil filter becomes very hot when the engine is running and remains hot for some time after the engine has stopped.
When checking or servicing in the engine compartment while the engine is running
WARNING
A running engine can be dangerous.
Keep your fingers, hands, clothing, hair and tools away from the cooling fan, drive belt and any other moving engine parts. Removing rings, watches and ties is advisable.
Before checking or servicing in the engine compartment
WARNING
Always stop the engine and apply
the parking brake firmly to prevent
the vehicle from moving.
Always let the engine cool down.
Engine parts become very hot
when the engine is running a ...
Engine hood
CAUTION
When you open the engine hood,
do not stand the wiper blades up.
Furthermore, while the hood is
open, do not operate the windshield
wipers. Doing so could
result in damage to t ...
Other materials:
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyADJUSTMENT1. Install the thrust bearing to the internal gear.NOTE:Face the temper color surface to the reverse brake side.2. Measure depth “A” from the ST upper face to the washer mounting surface.ST 499575600GAUGE3 ...
Inspection
GLASS/WINDOWS/MIRRORS > Rear Regulator and Motor AssemblyINSPECTION1. Disconnect the connector of the motor - rear.2. Check the motor operation when battery voltage is applied between terminals of the motor - rear connector.• LH sideTerminal No.Inspection conditionsStandard4 (+) — 1 (&min ...
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission Control Module (TCM)REMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.2. Remove the instrument panel lower cover. Instrument Panel Lowe ...
