Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Warning chimes and warning indicator of the keyless access with push-button start system (if equipped)

Subaru Crosstrek Owners Manual / Instruments and controls / Warning and indicator lights / Warning chimes and warning indicator of the keyless access with push-button start system (if equipped)

Access key warning indicator (type A)
Access key warning indicator (type A)

Access key warning indicator (type B)
Access key warning indicator (type B)

The warning chime and the access key warning indicator are used for the following purposes.

When the warning chime sounds and/or the warning indicator flashes, take the appropriate action.

WARNING

Never drive the vehicle if the indicator on the push-button ignition switch is flashing in green when starting the engine. This indicates the status that the steering wheel is not released and could result in an accident involving serious injury or death.

CAUTION

NOTE

List of warnings

CAUTION

When any of the following warnings occurs even if the access key warning indicator does not appear, take the appropriate action.

Inside warning chime Outside warning chime Access key warning indicator on meter Operation indicator on push-button ignition switch Status Action
Ding, ding ...

(intermittent)

-

- - The driver's door is opened while the push-button ignition switch is "ACC" and the select lever is in the "P" position. Switch the push-button ignition switch to "OFF", or close the driver's door.

*When exiting the vehicle, be sure to switch the push-button ignition switch to "OFF".

The push-button ignition switch is switched to "OFF" while the driver's door is open. Close the driver's door.
Ding Short beep (2 seconds) - - Lockout warning: An attempt is made to lock all doors while the access key is left inside the vehicle. Take out the access key from the vehicle, and lock the doors.

*The doors cannot be locked while the access key is inside the vehicle.

*A chirp sound will be heard, and all doors will be unlocked.

- Short beep (2 seconds) - - Access key lock-in warning: The door lock sensor is touched while the push-button ignition switch is "OFF" and the access key is inside the vehicle. Take out the access key from the vehicle, and lock the doors.

*If the access key is inside the vehicle, the doors cannot be locked

- Beep, beep, beep, beep, beep (5 times) - - Door ajar warning: The door lock sensor is touched while the ignition switch is in the "OFF" position and one of the doors including the rear gate is opened. Close the doors securely and lock them.

*If one of the doors including the rear gate is opened, the doors cannot be locked.

Ding Long beep (60 seconds max.) - - Power warning: The door lock sensor is touched while you are carrying the access key, the push-button ignition switch is in a position other than "OFF" and the select lever is in the "P" position Return the access key inside the vehicle, or switch the push-button ignition switch to "OFF".

*If the push-button ignition switch is not switched to "OFF", the doors cannot be locked.

Ding, ding ...

(7 seconds)

- - Access key warning: The vehicle is driven while the access key is not inside the vehicle. Carry the access key, and drive the vehicle.
Ding - - Access key warning for engine start: The push-button ignition switch is pressed while the access key is not inside the vehicle. Carry the access key, and press the push-button ignition switch.
Ding Beep, beep, beep (3 times) - Access key takeout warning: The driver exits the vehicle with the access key and closes the driver's door while the push-button ignition switch is in a position other than "OFF" and the select lever is in the "P" position. Switch the push-button ignition switch to "OFF", and get out of the vehicle.
Ding Beep, beep, beep (3 times) - Passenger access key takeout warning: A fellow passenger exits the vehicle with the access key and closes a door other than the driver's door while the push-button ignition switch is in a position other than "OFF". Return the access key to inside the vehicle, or switch the push-button ignition switch to "OFF".
Long beep (continuous) Long beep (continuous) - The driver exits the vehicle with the access key and closes the driver's door while the push-button ignition switch is in a position other than "OFF" and the select lever is in a position other than the "P" position. Shift the select lever to the "P" position, switch the push-button ignition switch to "OFF" and exit the vehicle.
Long beep (continuous) - - - Select lever position warning:
  • Case 1: The engine is turned off by pressing the push-button ignition switch while the select lever is in a position other than the "P" position.
  • Case 2: The driver's door is opened while the push-button ignition switch is in a position other than "OFF" and the select lever is in a position other than the "P" position.
  • Case 1: Start the engine, shift the select lever to the "P" position, switch the push-button ignition switch to "OFF" and exit the vehicle
  • Case 2: Shift the select lever to the "P" position, switch the push-button ignition switch to "OFF" and exit the vehicle.
Ding - - - The battery of the access key is low. Replace the battery of the access key.
Ding - - Flashes in green (15 seconds max.) Steering lock warning: The engine start procedure is performed, but the steering is still locked. While turning the steering wheel right and left lightly, depress the brake pedal and press the pushbutton ignition switch.
Ding - - Flashes in orange System malfunction warning: A malfunction is detected in the power system or steering lock. Contact a SUBARU dealer immediately and have the vehicle inspected.
Vehicle Dynamics Control OFF indicator light
The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system. The Vehicle Dynamics Control system is probably malfunctioni ...

Security indicator light
This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system. Alarm system It blinks to show the driver the operational status of the alarm sys ...

Other materials:

Vehicle Dynamics Control OFF indicator light
The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system. The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately ...

Dtc p2763 torque converter clutch pressure control solenoid control circuit high
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2763 TORQUE CONVERTER CLUTCH PRESSURE CONTROL SOLENOID CONTROL CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTrouble symptom:• No lock-up occurs.• Engin ...

Security system Wiring diagram
WIRING SYSTEM > Security SystemWIRING DIAGRAM1. WITHOUT PUSH BUTTON START2. WITH PUSH BUTTON START ...

© 2016-2024 Copyright www.sucross.com