Subaru Crosstrek Owners Manual: Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator light

Power steering warning light

This warning light illuminates when the ignition switch is turned to the "ON" position and turns off after the engine has started. This indicates that the warning system is working properly. ...

Vehicle Dynamics Control warning light

CAUTION The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system beco ...

Other materials:

Installation
SECURITY AND LOCKS > Impact SensorINSTALLATION1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. Disconnect the ground cable from battery. NOTE">5. In ...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF FilterREMOVALNOTE:• Although CVTF filter is a maintenance-free part, replace it if a large quantity of wear debris and metal particles are found in CVTF and CVTF filter.• For removal of CVTF filter, refer to “Transmission Case&rdq ...

System temporary stop indicator
System temporary stop indicator This indicator appears when the system is used under the following conditions. Extremely high or low temperatures When abnormal voltage exists for the vehicle battery When the radar sensor is significantly misaligned Once the above conditions are ...