Subaru Crosstrek Service Manual: Variator chain

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Turbine Speed SensorINSTALLATIONCAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occur ...

Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Variator ChainINSPECTIONCheck the variator chain for damage and wear. ...

Other materials:

Removal
WIPER AND WASHER SYSTEMS > Combination Switch (Wiper)REMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - column.(1) Release the clips, and remove the cover assembly - steering UPR.(2) Remove the screws by turning the steering wheel to right and left.( ...

Inspection
DRIVE SHAFT SYSTEM > Front Hub Unit BearingINSPECTION1. Moving the front tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the hub unit bearing.2. Inspect ...

BSD/RCTA (if equipped)
The BSD/RCTA consists of rear radar with Blind Spot Detection and Rear Cross Traffic Alert. These functions enable the system to detect objects or vehicles to the rear, drawing attention to the driver when changing a lane or when driving in reverse. WARNING The driver is responsible for d ...