Subaru Crosstrek Owners Manual: Unit settings
Sound quality adjustment, screen adjustment, and information of the audio unit are displayed.
1. Press the HOME button on the audio panel.
2. Touch the "SETTINGS" key.
3. Select the items to be set.
Available setting:
- General settings: Select the
tab to
check the system software update information.
Refer to "General settings" 5-20.
- Bluetooth settings: Select the
tab to
set the Bluetooth settings. Refer to "Bluetooth
settings" 5-20. - Sound settings: Select the
tab to set
the sound quality settings. Refer to
"Sound settings" 5-20. - Display settings: Select the
tab to
set the screen settings. Refer to "Display
settings" 5-25. - SUBARU STARLINK settings (if
equipped): Select to the
tab set the
SUBARU STARLINK settings. Refer to
"SUBARU STARLINK settings" 5-26.
Selecting a function menu
Press the HOME button to display home
screen.
Item
Function
AUDIO
Select to display the main
screen of the audio source that
was selected previously.
PHONE
...
General settings
Touch the tab for the audio unit
basic
settings.
Item
Function
System
Language
Select to change the language
Button
Beeps
Select to set the sound beeps ...
Other materials:
Inspection
ENGINE (DIAGNOSTICS)(H4DO) > General DescriptionINSPECTIONBefore performing diagnostics, check the following item which might affect engine problems.1. BATTERY1. Check the battery. Battery > INSPECTION">2. Check the condition of the main and other fuses, and harnesses and connectors. ...
Dtc b1812 short in driver s airbag dual stage - 2nd step (to ground)
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1812 SHORT IN DRIVER’S AIRBAG DUAL STAGE - 2ND STEP (TO GROUND)Diagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Airbag main harness circuit is shorted to ground.• Airbag modu ...
Preparation for date setting
Turn the ignition switch to the "ON"
position.
Push and hold the button to show
the selection screen.
After the selection screen is displayed,
operate the "
"
or "
" switch to show the
"Time/Date" item. Then, push the
button.
...
