Subaru Crosstrek Service Manual: Tumble generator valve assembly

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve ActuatorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new gasket.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb) ...

Inspection

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyINSPECTION1. CHECK MOTOR1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal N ...

Other materials:

Installation
STARTING/CHARGING SYSTEMS(H4DO) > StarterINSTALLATIONInstall in the reverse order of removal.NOTE:• For CVT model, a nut is used at (a).• Tighten the starter and cable stay (b) together using the upper bolt securing the starter.Tightening torque:T1: 14 N·m (1.4 kgf-m, 10.3 ft-l ...

Dtc b1431 in-vehicle (post evaporator) temperature sensor circuit short-circuit
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1431 IN-VEHICLE (POST EVAPORATOR) TEMPERATURE SENSOR CIRCUIT SHORT-CIRCUITDTC detecting condition:In-vehicle sensor circuit is shorted.Trouble symptom:In-vehicle air temperature is falsely recognize ...

Installation
EXHAUST(H4DO) > Front Exhaust PipeINSTALLATION1. Set the front exhaust pip and center exhaust pipe to the vehicle, and temporally tighten the nuts which secure the front exhaust pipe to cylinder head.NOTE:Use a new gasket.2. Install the bolts, springs, and nuts which secure the rear exhaust pipe ...