Subaru Crosstrek Owners Manual: Triple meter screen
Triple meter screen (display example)
This screen displays up to three optional pieces of information that can be selected from the following items.
The items shown in the triple meter screen can be changed. For details, refer to "Triple meter setting"
| Item | Details |
 |
Average vehicle speed (Average vehicle speed for the entire driving time from when the trip meter was reset) |
 |
Lifetime fuel consumption |
 |
Engine oil temperature |
 |
Accelerator opening ratio |
 |
Journey time (the time that has elapsed since the ignition switch was turned to the "ON" position) (if equipped) |
 |
Journey distance (the distance that has been driven since the ignition switch was turned to the "ON" position) |
 |
Average fuel consumption for the entire driving distance from when the ignition switch was turned to the "ON" position |
 |
Boost pressure |
EyeSight screen (models with EyeSight system)
Current vehicle speed
Set vehicle speed
Preceding vehicle
Your vehicle
This screen displays the status of the
EyeSight system. For details, refer to the
Owner's Manual supplement for ...
Guidance screen
When the
button is pressed and held,
the selection screen can be displayed.
The displayed contents can be set or
customized from the selection screen. For
details, refer to "Selectio ...
Other materials:
Waxing and polishing
Always wash and dry the vehicle before
waxing and polishing.
Use a good quality polish and wax and
apply them according to the manufacturer's
instructions. Wax or polish when
the painted surface is cool.
Be sure to polish and wax the chrome trim,
as well as the painted surfaces. Loss of
...
Dtc c1432 different ecu specifications
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1432 DIFFERENT ECU SPECIFICATIONSNOTE:For the diagnostic procedure, refer to “DTC C1423 DIFFERENT ECU SPECIFICATIONS”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) &g ...
Language setting
1. Perform the preparation steps according
to "Preparation for screen settings"
2. Operate the "
" or "
" switch to
select the "Languages" item. Then push
the
button.
3. The current language setting will be
displayed. Push the
button to enter
the language s ...
