Operations are performed by touching the touch screen directly with your finger.
Operation method | Outline | Main use |
Touch Quickly touch and release once. |
Changing and selecting various settings | |
Drag* Touch the screen with your finger, and move the screen to the desired position. |
Scrolling the lists | |
Flick* Quickly move the screen by flicking with your finger. |
Scrolling the main screen page |
*: The above operations may not be performed on all screens.
NOTE
There may be a delayed response to flick operation that are performed at high altitudes.
Lock
The key can only be inserted or removed
in this position. The ignition switch will lock
the steering wheel when you remove the
key.
If turning the key is difficult, turn the
steering wheel slightly to the right and left
as you turn the key.
The key can be turned from the "ACC" to
"LOCK" ...
Check list for interview Check
LAN SYSTEM (DIAGNOSTICS) > Check List for InterviewCHECKInspect the following item about the vehicle’s state.1. DISPLAY STATUS IN THE COMBINATION METERDisplay status in the combination meterEngine coolant temperature gauge display OK / NGFuel gauge display OK / NGTachometer display OK / ...
Installation
FRONT SUSPENSION > Front Ball JointINSTALLATION1. Install the ball joint assembly to the housing assembly - front axle.CAUTION:• Do not apply grease to the tapered portion of ball stud.• Before tightening, make sure the bottom surface of the housing assembly - front axle and the stepp ...