Subaru Crosstrek Owners Manual: Tips
- The system can be armed even if the engine hood, windows and/or moonroof are open. Always make sure that they are fully closed before arming the system.
- The 30-second standby time can be eliminated if you prefer. Have it performed by your SUBARU dealer.
- The system is in the standby mode for a 30-second period after locking the doors with the remote transmitter. The security indicator light will flash at short intervals during this period.
- If any of the following actions are done during the standby period, the system will not switch to the surveillance state.
Doors (including the rear gate) are unlocked using the access key/remote transmitter.
Doors (including the rear gate) are unlocked using the keyless access function (models with "keyless access with push-button start system").
Any door (including the rear gate) is opened.
The ignition switch is turned to the "ON" position (models without "keyless access with push-button start system").
Push-button ignition switch is turned to the "ACC" position (models with "keyless access with push-button start system").
To arm the system using access
key/remote transmitter
1. Close all windows and the moonroof (if
equipped).
2. Remove the key from the ignition
switch (models without "keyless access
with push-button start system")/turn the
push-button ignition swi ...
Other materials:
Basic diagnostic procedure Procedure
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.PERFORM CUSTOMER INTERVIEW.Using the Check List for Interview, ask the customer the condition of how trouble occurs.Did you interview the customer? Basic Diagnostic Procedure > PROC ...
Welcome screen
When the door is unlocked and the
driver's door is opened, the welcome
screen will appear for a short time.
NOTE
The welcome screen will disappear
when the ignition switch is turned to
the "ON" position while the welcome
screen is displayed.
If any of the doors (including the
re ...
List
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Read Current DataLISTDisplayContents to be displayedUnit of measureTire 1 FN codeLEARN, LOW BAT, OFF, WAKE, RE ME, NORMALLEARN: Transmitted transmitter ID using the transmitter registration toolLOW BAT: Transmitter battery voltage running lowOFF: Tr ...
