Subaru Crosstrek Owners Manual: System temporary stop indicator due to reduced radar sensitivity
System temporary stop indicator due to reduced radar sensitivity
This indicator appears when the detectability of the radar sensors is reduced.
Once the condition is corrected, the system will recover from the temporary stop condition and the indicator will disappear.
If the indicator remains displayed for a prolonged time, have the system inspected at a SUBARU dealer.
System temporary stop indicator
System temporary stop indicator
This indicator appears when the system is
used under the following conditions.
Extremely high or low temperatures
When abnormal voltage exists for the
veh ...
System malfunction indicator
System malfunction indicator
At first, this message will appear
Then this message will appear
This indicator appears when a malfunction
occurs in the system. Contact a SUBARU
dealer and ...
Other materials:
Preparation tool
MECHANICAL(H4DO) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS0920287002000REMOVER AND REPLACERUsed for removing and installing valve spring.498277200STOPPER SETUsed for preventing the torque converter from falling when removing and installing the e ...
Dtc u0416 invalid data received from vehicle dynamics control module
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0416 INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULENOTE:Refer to “LAN SYSTEM” for diagnostic procedure. Basic Diagnostic Procedure"> ...
Adjustment
CLUTCH SYSTEM > Clutch PedalADJUSTMENT1. Turn the lock nut until the full stroke of clutch pedal becomes within the specification.CAUTION:When adjusting the full stroke of clutch pedal, do not turn the clutch switch.NOTE:If the lock nut cannot adjust the full stroke of clutch pedal to the specifi ...
