Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: System operation

Operating conditions

The BSD/RCTA will operate when all of the following conditions are met.

The BSD/RCTA will not operate in the following situations.

NOTE

When a malfunction occurs in the system (including the BSD/RCTA approach indicator light), the BSD/RCTA will stop operating and the BSD/RCTA warning indicator will appear.

If the BSD/RCTA warning indicator appears, exercise proper caution. For details, refer to "BSD/RCTA warning indicator" F7-54.

In the following cases, the BSD/ RCTA will temporarily stop operating (or may stop operating) and the BSD/ RCTA warning indicator will appear.

The BSD/RCTA will resume operation once these conditions are corrected, and the BSD/RCTA warning indicator will disappear. However, if the BSD/ RCTA warning indicator appears for a prolonged period of time, have the system inspected at a SUBARU dealer as soon as possible.

The detectability of the radar sensors is restricted. The BSD/RCTA detection may be impaired and the system may not operate properly under the following conditions.

The radar sensors may not detect or may have difficulty detecting the following.

On a road with extremely narrow lanes, the system may detect vehicles driving in a lane next to the neighboring lane.

Rear Cross Traffic Alert (RCTA)
Operating range The system notifies the driver of another vehicle approaching from either side when driving in reverse. This feature helps the driver check the rear and side areas of the ...

BSD/RCTA approach indicator light/warning buzzer
While the BSD/RCTA is active, the following item(s) will operate to alert the driver: The BSD/RCTA approach indicator light (when there are vehicles in the neighboring lanes). The BSD/RCTA ...

Other materials:

Inspection
LIGHTING SYSTEM > Ignition Switch IlluminationINSPECTIONSTEPCHECKYESNO1.CHECK THE IGNITION SWITCH ILLUMINATION.Make sure the ignition switch illumination illuminates when driver’s side door is open.Does the ignition switch illumination illuminate?Ignition switch illumination is normal. Igni ...

Control screen and audio panel
Select to display the audio source selection screen.  level settings" Turn to adjust volume. Press to turn the audio system on/off. Press to select an audio source. Refer to "Selecting an audio source" Press to display the sound setting screen. Refer to "Unit settings" ...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Torque Converter AssemblyREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Pull out the torque converter assembly horizontally.CAUTION:Do not scratch the inside of engaging parts.3. Re ...

© 2016-2024 Copyright www.sucross.com