Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Stopping the engine

The ignition switch should be turned off only when the vehicle is stopped and the engine is idling.

WARNING

Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in accidental activation of the "LOCK"/"OFF" position on the ignition switch, causing the steering wheel to lock.

CVT models
1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Shift the select lever to the "P" or "N" position (preferably the "P" position). The starter motor will only op ...

Starting and stopping engine (models with push-button start system)
Safety precautions Refer to "Safety precautions" F2-10. Operating range for push-button start system Refer to "Operating range for push-button start system" F3-6. ...

Other materials:

Removal
LIGHTING SYSTEM > Rear Side Marker Light BulbREMOVAL1. CROSSTREK MODEL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - rear combination.CAUTION:Be careful not to damage the clips.(1) Release the bolts and clips, then pull out the light assembly - rear com ...

Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel PumpINSTALLATION1. Install the fuel pump assembly to the fuel tank.(1) Make sure the sealing portion is free from fuel or foreign matter before installation.(2) Align the protrusion (A) of the gasket to the position shown in the figure, and install the g ...

Dtc b2801 tcm abnormal
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2801 TCM ABNORMALDetected when error occurs in the automatic transmission.When lost communication with TCM and TCM abnormal occur simultaneously, perform diagnosis for lost communication with TCM first.NOTE:Check ...

© 2016-2022 Copyright www.sucross.com