Subaru Crosstrek Owners Manual: Steering responsive fog lights warning indicator/ Steering responsive fog lights OFF indicator (models with EyeSight system)
NOTE
For details about the steering responsive fog lights system, refer to "Steering responsive fog lights system (models with EyeSight system)"
Steering responsive fog lights warning indicator
This indicator appears when the steering responsive fog lights system malfunctions.
When this indicator appears while the system is activated, contact your SUBARU dealer for an inspection.
Steering responsive fog lights OFF indicator
This indicator appears when the steering responsive fog lights system is deactivated.
This indicator disappears when the system is activated.
BSD/RCTA warning indicator (if equipped)
This
warning indicator appears when the
BSD/RCTA is malfunctioning. In this case
the BSD/RCTA warning indicator will be
shown on the multi information display of
the combination meter. When this indicator
appears, have your vehicle inspected
by your SUBARU dealer as soon as
possible.
BSD/RCTA OFF indicator (if equipped)
The
indicator appears when the BSD/
RCTA OFF switch is pressed to deactivate
the BSD/RCTA. In this case the BSD/
RCTA OFF indicator will be shown on the
multi information display of the combination
meter. For details, refer to "BSD/
RCTA"
Headlight indicator light
This
indicator light illuminates under the
following conditions.
when the light switch is turned to the
"
" or "
" position
when the light control switch is in the
"AUTO" posit ...
Information display (if equipped)
NOTE
For models with color multi function
display, refer to "Multi function display"
Outside temperature indicator
Driving information display
Clock
With the ignition switch in the "A ...
Other materials:
Installation
COOLING(H4DO) > Water PumpINSTALLATION1. WATER PUMP PULLEY1. Using the ST, install the water pump pulley.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SETTightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)2. Install the under cover. Front Under Cover > INSTALLATION" ...
Clear memory mode Operation
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, se ...
Installation
SECURITY AND LOCKS > Front Door Latch and Door Lock Actuator AssemblyINSTALLATION1. Before installation, check the following items.• Rod is free from deformation.• Grease is applied sufficiently to rod joints.If grease is insufficient, add it as necessary before assembling the rod.&bu ...
